Report item
Item specifics
  • Demo Board Type: ARM
  • Category: STM32F4 ARM Cortex-M4 Development Board
  • For use with: STM32F407I Development & Study
  • Features: Open & Modular design, features various communication interfaces
  • Supports: 3.2inch 320x240 Touch LCD (B)
  • Programming interface: JTAG/SWD
  • User Guide: DVD is included
  • Place of Origin: Guangdong, China (Mainland)
  • STM32F407IGT6: the high performance STM32 MCU
  • Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
Product Description

hello,
Your order is under $8, we unified send China Post Ordinary Small Packet Plus.
There is no tracking information, usually arrived in your country is 40-70 days, we don\\\'t accept the dispute,
If you don\\\'t wait, it is recommended that the purchase order is more than $8,


Your order is more than $8, we unified make arrangements for your China Post Registered Air Mail,
Have a tracking number query information, general arrived in your country is 25 to 50 days,
Please after receipt of the goods, the products in a 5 star evaluation, thank you for your understanding,

STM32 ARM Cortex-M4 STM32 Development Board STM32F407IGT6 STM32F407+ PL2303 USB UART Module+ Free Shipping= Open407I-C Standard

STM32 development board designed for STM32F407I series, features the STM32F407IGT6 MCU, and integrates various standard interfaces, pretty easy for peripheral expansions.



Overview

Open407I-C is an STM32 development board designed for the STM32F407IGT6 microcontroller, consists of the mother board and the MCU core board Core407I.


The Open407I-C supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32F4 series microcontrollers.

What\\\\\\\'s on the mother board

  1. MCU core board connector: for easily connecting the Core407I
  2. CAN1 interface: communicates with accessory boards which feature the CAN device conveniently
  3. PS/2 interface: easily connects to PS/2 keyboard and/or mouse
  4. DCMI interface: for connecting camera module
  5. I2C2 / I2C3 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), EEPROM (AT24Cxx), etc.
  6. SPI1 / SPI2 interface
    • easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.
    • SPI1 features AD/DA alternative function, supports connecting AD/DA module as well
  7. I2S2 / I2S3 / I2C1: for connecting I2S peripherals, such as Audio module
  8. SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI
  9. USART3 interface: easily connects to RS232, RS485, USB TO 232, etc.
  10. CAN2 interface: communicates with accessory boards which feature the CAN device conveniently
  11. 16-bit FSMC interface: easily connects to peripherals such as NorFlash, SRAM, etc.
  12. 16-bit FSMC + SPI interface: for connecting touch screen LCD
  13. 8-bit FSMC interface: easily connects to peripherals such as NandFlash, Ethernet, etc.
  14. UART1 interface: easily connects to RS232, RS485, USB TO 232, etc.
  15. Ethernet interface: easily connects the MCU to ethernet network by using an additional ethernet module
  16. ULPI interface: for connecting high-speed USB peripheral (the STM32F407I integrates USB HS controller without any PHY device)
  17. USART2 interface: easily connects to RS232, RS485, USB TO 232, etc.
  18. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
  19. 5V DC jack
  20. 5V/3.3 V power input/output: usually used as power output, also common-grounding with other user board
  21. MCU pins connector: all the I/O ports are accessible on expansion connectors for further expansion
  22. 74LVC139: used for FSMC expansion, make it possible to connect multi devices through FSMC at the same time, such as LCD and NAND FLASH
  23. LEDs: convenient for indicating I/O status and/or program running state
  24. User key: convenient for I/O input and/or interact with running code
  25. Wake-Up button: wake up the STM32 MCU from sleep mode, also used as regular user key
  26. Joystick: five positions
  27. Crystal empty slot (on bottom side): for soldering 50M active crystal oscillator, which\\\\\\\'ll provide clock to DCMI
  28. 74LVC139 selection jumper: for FSMC chip select
  29. PS/2 jumper
  30. LEDs jumper
  31. User key / joystick jumper

For jumpers 27-30:

  • short the jumper to connect to I/Os used in example code
  • open the jumper to connect to other custom pins via jumper wires


What\\\\\\\'s on the Core407I

  1. STM32F407IGT6: the high performance STM32 MCU which features:
    • Core: Cortex-M4 32-bit RISC
    • Feature: a full set of single-cycle DSP instructions
    • Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
    • Operating Voltage: 1.8V-3.6V
    • Package: LQFP176
    • Memories: 1024kB Flash, 192+4kB SRAM
    • MCU communication Interfaces:
      • 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C
      • 1 x FSMC, 1 x SDIO, 2 x CAN
      • 1 x USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY
      • 1 x 10/100 Ethernet MAC
      • 1 x 8 to 14-bit parallel camera interface
    • AD & DA converters: 3 x AD (12-bit, 1s, shares 24 channels); 2 x DA (12-bit)
    • Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
  2. AMS1117-3.3 (on bottom side), 3.3V voltage regulator
  3. MIC2075 (on bottom side), onboard USB power management device
  4. Power supply switch, powered from 5Vin or USB connection
  5. Boot mode switch, for configuring BOOT0 pin
  6. Power indicator
  7. VBUS LED
  8. Reset button
  9. 8M crystal oscillator (on bottom side)
  10. 32.768K crystal (on bottom side), for internal RTC with calibration
  11. JTAG/SWD interface: for debugging/programming
  12. USB interface
    • as DEVICE, used for establishing USB communication between PC and the STM32 development board
    • as HOST, connecting to USB devices such as USB flash drive through a USB OTG cable
  13. MCU pins expander, VCC, GND and all the I/O ports are accessible on expansion connectors for further expansion
  14. 5Vin pinheader, 5V power supply is required when using USB HOST/OTG
  15. USB HOST/OTG jumper
    • short the jumper when using USB HOST/OTG
    • open the jumper to disconnect from I/O port
  16. VBAT selection jumper
    • short the jumper to use system power supply
    • open the jumper to connect the VBAT to external power, such as battery
  17. VREF selection jumper
    • short the jumper to connect VREF+ to VCC
    • open the jumper to connect VREF+ to other custom pin via jumper wire


Photos



(Easy expansion, you can add accessory boards as you like!!)

Note:
The Open407I-C supports programming via STM32 USART bootloader, a USB TO UART accessory board is also provided in the package.
The Open407I-C does NOT integrate any debugging function, a debugger is required.


JTAG/SWD Interfaces



Development Resources

The User Guide CD includes development resources listed as follow:

  • Related software (KEIL etc.)
  • Demo code (examples in C, C/OS-II)
  • Schematic (PDF)
  • STM32 development documentations (Datasheet etc.)


Open407I-C Standard Contains

  1. Open407I-C development board x 1
  2. PL2303 USB UART Board (mini) x 1
  3. USB type A plug to mini-B plug cable x 1
  4. USB type A receptacle to mini-B plug cable x 1
  5. 4-pin wire x 2
  6. 2-pin wire x 2
  7. USB power cable x 1
  8. User Guide CD x 1









Terms & Conditions

1. Payment:
* We accept Escrow as the payment method. Currently, you can pay by Visa, MasterCard and bank transfer. For more information about making payment, please go to \\\\\\\'Escrow FAQ\\\\\\\' to get more details. escrow.aliexpress.com/escrow-faq/payment/what-payment-methods-can-i-use.html

2. Shipping:
* We ship items to Worldwide!
* Please make sure that your shipping address is 100% correct.
* All items will be shipped within 48 working hours on receipt of cleared payment.
* We\\\\\\\'ll add a tracking number after sending the item so that you can track your parcel.

3. Returns Policy:
* We are happy to return any unused item in its original packaging within 14 days of delivery.
* Buyers are responsible for the round(two-way) shipping cost.

4. Feedback:
* We\\\\\\\'ll leave 5 stars POSITIVE FEEDBACK on receipt of cleared payment.
* If you\\\\\\\'re satisfied with the item and our service, please leave POSITIVE FEEDBACK, it\\\\\\\'s important to us.
* Once any problems occured, please contact us first. We\\\\\\\'ll try our best to work things out.

Please feel free to contact us for any questions, on trademanager, or send message to me. If you need to adjust the total price, pls contact us in advance. It\\\\\\\'s our pleasure to serve you! We appreciate your business!!

Packaging Details
  • Unit Type: piece
  • Package Weight: 0.3kg (0.66lb.)
  • Package Size: 20cm x 18cm x 10cm (7.87in x 7.09in x 3.94in)
Shipping
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.3kg (0.66lb.)
  • Package Size: 20cm x 18cm x 10cm (7.87in x 7.09in x 3.94in)
Payment
We support the following payment methods. All payments made on AliExpress are processed by Alipay.